[原创]VB P-code的调试方法总结
P-code伪编码，用od太麻烦，需用到WKTVBDebugger
方法1：
把cm放到wktv目录下面，打开，运行
机器码与命令：
BranchF: 机器码1C 类似jnz/jne 如果堆栈为0就跳
BranchT: 机器码1D 类似je/jz 如果堆栈为-1就跳
Branch: 机器码1E 类似jmp 无条件跳
单击‘高级信息’或‘Analize BranchX' 可看到当前进程所有跳转位置
EqVarBool: 机器码33 比较指令，根据结果将0或-1压入堆栈
ConcatStr: 机器码2A 字符串连接指令 ，此指令单步跟踪时会在日志窗口留下相应结果，可ctr+O在此处下断
LitI2_Byte: 机器码F4 将数据压入堆栈
FLdZeroAd/CVarStr:取字符串指令，特点同ConcatStr
方法2：
也可结合VB Decompiler找到if地址，（或直接在这里推导算法），个人喜欢用这种方法直接推导算法
去od的dump窗口找这个地址，把1C改成1D即可爆破
方法3：
VBParser先分析一下，
然后倒入od,在关键处下内存断点，单步跟
现在用方法2举个栗子：
cm导入vb decompiler:
Dim var_11C As Variant
Dim var_176 As Integer
loc_40E28C: If (Me.txtname.Text = vbNullString) Then
loc_40E2B0: MsgBox("You have to enter you name first.", &H40, "Error", var_FC, var_11C)
loc_40E2C0: Exit Sub
loc_40E2C1: End If
loc_40E2E1: If (Me.txtkey.Text = vbNullString) Then
loc_40E305: MsgBox("You have to enter a key first.", &H40, "Error", var_FC, var_11C)
loc_40E315: Exit Sub
loc_40E316: End If
loc_40E336: If (Me.txtkey.Text = vbNullString) Then
loc_40E35A: MsgBox("You have to enter at least 5 chars.", &H40, "Error", var_FC, var_11C)
loc_40E36A: Exit Sub
loc_40E36B: End If
上面是查看name和key是否为空且name必须长度大于5
loc_40E393: For var_14C = 1 To CVar(Len(Me.txtname.Text)): var_12C = var_14C 'Variant 变量12c=变量14c
loc_40E3C1: var_FC = Mid(CVar(Me.txtname.Text), CLng(var_12C), 1) FC轮询name每一位
loc_40E3D5: var_11C = var_94 &
CVar(Asc(CStr(var_FC)))
变量94= name每一位变体，并组合，例如name为‘11111’那么变量94=‘4949494949’
loc_40E3D9: var_94 = var_11C 'Variant
loc_40E3EF: Next var_14C 'Variant
loc_40E3F5: ' Referenced from: 40E422
loc_40E404: If (Len(var_94) > 9)
Then
变量94反复除以3.14直到变量94为9位数
loc_40E41E: var_94 = Fix((var_94 / 3.141592654)) 'Variant 并赋值给变量94
loc_40E422: GoTo loc_40E3F5
loc_40E425: End If
loc_40E449: var_94 = (var_94 Xor &H30F85678 - CVar(global_76))
'Variant
变量94与30F85678异或，再减去全局变量76，通过其他函数可以查到全局变量，大家自己动手查查
loc_40E45A: For var_170 = 1 To 10: var_12C = var_170 'Variant
loc_40E489: If (Me.txtkey.Text = global_52(CLng(var_12C))) Then
loc_40E48C: End If
loc_40E48F: Next var_170 'Variant
loc_40E4DE: If ((CVar(Me.txtkey.Text) - var_94) = CVar(Len(Me.txtname.Text))) Then 密码-变量94=name长度，得密码
loc_40E502: MsgBox("Wow, you have found a correct key!", &H40, "Correct key", var_FC, var_11C)
loc_40E533: MsgBox("Mail me, how you got it: CyberBlade@gmx.net ", &H40, "Correct key!", var_FC, var_11C)
loc_40E550: Me.Command2.Caption = "Exit"
loc_40E55B: Else
loc_40E567: global_80 = (global_80 + 1)
loc_40E570: var_176 = global_80
loc_40E579: If (var_176 = 6) Then
loc_40E5B3: If (MsgBox("-=Do you need a hint ?=-", &H24, "I can't stand it anymore", var_FC, var_11C) = 7) Then
loc_40E5B6: Exit Sub
loc_40E5BA: Else
loc_40E5DB: MsgBox("Forget it.", &H40, "he, he...", var_FC, var_11C)
loc_40E5F0: global_80 = 0
loc_40E5F3: End If
loc_40E5F6: Else
loc_40E5FC: If (var_176 > 3) Then
loc_40E620: MsgBox("Have you ever been trying to be successful in
cracking my password ?", &H20, "Failed", var_FC, var_11C)
loc_40E633: Else
loc_40E639: If (var_176 <= 3) Then
loc_40E65D: MsgBox("Sorry, wrong key.", &H40, "Failed", var_FC, var_11C)
loc_40E66D: End If
loc_40E66D: End If
loc_40E66D: End If
loc_40E66D: End If
loc_40E677: Me.txtkey.SetFocus
loc_40E67F: Exit Sub所以说我个人是十分推荐方法2的，一目了然
